Vezi detalii

surse DC stepdown adjustabila LM2596 sau stepup

Sursă: https://publi24.ro

Total conversii: 0.

Găsit: 07-07-2025

Va fi șters: 14-07-2025

Detalii: surse DC stepdown adjustabila LM2596 sau stepup 1) 5A XL4015 DC-DC 4-38V to 1.25-36V 24V 12V 9V 5V Step Down Adjustable Power Supply Module LED Lithium Charger With Heat Sink 21ron 2) stepdown xl6009: 19ron IN-IN + input Positive Input Negative! Positive output OUT + OUT-output negative Test comparison sample reference: Input 3V Output 12V 0.4A ... Timisoara, Timis azi 19 RON Telefon validat 1) 5A XL4015 DC-DC 4-38V to 1.25-36V 24V 12V 9V 5V Step Down Adjustable Power Supply Module LED Lithium Charger With Heat Sink 21ron 2) stepdown xl6009: 19ron IN-IN + input Positive Input Negative! Positive output OUT + OUT-output negative Test comparison sample reference: Input 3V Output 12V 0.4A 4.8W Input 5V Output 12V 0.8A 9.6W Input 7.4V Output 12V 1.5A 18W Input 12V Output 15V 2A 30W Input 12V Output 16V 2A 32W Input 12V Output 18V 1.6A 28.8W Input 12V Output 19V 1.5A 28.5W Input 12V Output 24V 1 A 24W Vin * Iin * Efficiency = Vout * Iout Vin: Input Voltage Iin: input current Vout: Output Voltage Iout: output current DSN6009 4A is a high-performance step-up switching current (BOOST) module. The module uses the second generation of high-frequency switching technology XL6009E1 core chip performance than the first generation technology LM2577. XL6009 boost module at a lower cost, superior performance, LM2577 module is about to be eliminated. Wide input voltage 3V 32V, optimum operating voltage range is 5 32V; Wide Output voltage 5V 35V; Built-4A efficient MOSFET switches enable efficiency up to 94%; (LM2577 current is 3A) high switching frequency 400KHz, can use a small-capacity filter capacitors that can achieve very good results, the ripple smaller and smaller. (LM2577 frequency only 50KHz) Technical parameters: Model Specification DSN6009 boost module Module Properties Non-isolated boost (BOOST) Rectification Non-Synchronous Rectification Input Range 3V 32V Output Range 5V 35V Input Current 4A (max), no-load 18mA (5V input, 8V output, no-load is less than 18mA. Higher the voltage, the greater the load current.) Conversion efficiency <94% (greater the pressure, the lower the efficiency) Switching frequency 400KHz Output Ripple 50mV (the higher the voltage, the greater the current, the greater the ripple) Load Regulation 0.5% Voltage Regulation 0.5% Operating Temperature -40 +85 Dimensions 43mm * 21mm * 14mm (L * W * H) 3) LM2596 cu display voltmetru: 20ron Rectification mode:Non-synchronous rectifier Input voltage:3V-40V Output voltage:1.3V-35V Output current:Rated current is 2A,maximum 3A(Additional heatsink is required) Conversion efficiency:92%( highest ) Switching frequency:65KHz Output ripple:30mV( maximum ) Load regulation: 0.5% Voltage regulation: 2.5% Work temperature:-Minus 40 degrees - 85 degrees dimension:43mm*21mm*14mm(L*W*G) NOTE:This cant be used to step up Voltage Publi24_20840811

Accesați anunțul